| |
<%--
************************************************************
HTML Content Started Here
************************************************************
--%>
Category : RF Measurement
|
|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
HP / Agilent
|
11713A
|
HP / Agilent 11713A Attenuator/Switch Driver
|
Contact Sales
|
|
|
The 11713A attenuator/switch driver provides HP-IB or local front panel drive control for programmable attenuators and electromechanical switches. Concurrently drive up to two 8494/5/6/7, 84904/6/7K/L programmable attenuators and two electromechanical switches (8761, 8762, or 8765 series). The 11713A can also be used to supply +24 V common and ten pairs of current sinking contacts (total current draw <1.25A peak for 1 second, 0.65A steady state) to independent control up to 10 relays. An integral power supply with short circuit protection eliminates the need for an external power source. Each 11713A is supplied with two plug-in drive cables to simplify connection to programmable attenuators. Switching time is less than 10 milliseconds |
| |
| |
HP / Agilent
|
11720A
|
HP / Agilent 11720A Pulse Modulator
|
Contact Sales
|
|
|
Adds pulse modulation to microwave sources from 2 to 18 GHz. |
| |
| |
HP / Agilent
|
11729C
|
HP / Agilent 11729C Carrier Noise Test Set
|
Contact Sales
|
|
|
Down converts 1.28 to 18 GHz signals. IF output 5 to 1280 MHz. AM noisedemod down to 10 MHz. Sold new for $37,000. |
| |
| |
HP / Agilent
|
11793A
|
HP / Agilent 11793A Microwave Converter
|
Contact Sales
|
|
|
Extends the measurement capability of the HP 8902A Measuring Receiver from above 1.3 GHz to 26.5 GHz. LO Amplitude Range + 8 dBm to +13 dBm, 2 GHz to 18 GHz + 7 dBm to +13 dBm, 18 GHz to 26.5 GHz 0 dBm to +5 dBm, 18 GHz to 26.5 GHz |
| |
| |
HP / Agilent
|
3708A
|
HP / Agilent 3708A Noise Interference Test Set
|
Contact Sales
|
|
|
Provides accurate carrier/interference, carrier/noise measurements for microwave radio and satellite modem systems. 70 MHz, 140 MHz reference tone oscillator |
| |
| |
HP / Agilent
|
5364A
|
HP / Agilent 5364A Microwave Mixer/Detector
|
Contact Sales
|
|
|
Extends the benefits of the Modulation Domain (the frequency or phase of a signal expressed as a function of time) to frequencies from 2 to 18 GHz. When used with the HP 537XA Frequency and Time Interval Analyzers and a local oscillator, the 5364A can recover phase, frequency, and various digital modulations, such as QPSK, from a microwave carrier |
| |
| |
HP / Agilent
|
83713A
|
HP / Agilent 83713A Attenuator/Switch Driver
|
Contact Sales
|
|
|
The 11713A attenuator/switch driver provides HP-IB or local front panel drive control for programmable attenuators and electromechanical switches. Concurrently drive up to two 8494/5/6/7, 84904/6/7K/L programmable attenuators and two electromechanical switches (8761, 8762, or 8765 series). The 11713A can also be used to supply +24 V common and ten pairs of current sinking contacts (total current draw <1.25A peak for 1 second, 0.65A steady state) to independent control up to 10 relays. An integral power supply with short circuit protection eliminates the need for an external power source. Each 11713A is supplied with two plug-in drive cables to simplify connection to programmable attenuators. Switching time is less than 10 milliseconds |
| |
| |
HP / Agilent
|
85630A
|
HP / Agilent 85630A Scalar T/R Test Set
|
Contact Sales
|
|
|
Combines with a variety of HP spectrum analyzers to provide scalar network analysis capability. Compatible Spectrum Analyzers include HP 8590L, HP 8591E/93E/94E/95E/96E and HP 8591C with Opt 003 Memory Card Reader (HP 8590L) and Opt 010 Built-in Tracking Generator (50 Ohm). Also requires the HP 85714A Scalar Measurement Personality Card (not included) |
| |
| |
HP / Agilent
|
8902A
|
HP / Agilent 8902A Measuring Reciever
|
Contact Sales
|
|
|
N/A |
| |
| |
HP / Agilent
|
E930xx
|
HP / Agilent E930xx, RF Power Sensors
|
Contact Sales
|
|
|
The E-Series diode power sensors are wide dynamic range (90 dB max) which operate with the EPM and EPM-P series of power meters.The E4412A and E4413A sensors are designed for providing power measurements on continuous wave (CW) signals over the range -70 to +20 dBm, whereas the E930x-Series of power sensors measure the average power of the RF and microwave signals, regardless of modulation format, over an 80 dB maximum range |
| |
| |
HP / Agilent
|
85092C
|
RF ECal Module
|
$4,921.56
|
|
|
50 Ohm RF ECal Module |
| |
|
reseller, reseller channel development, channel development, reseller development, distribution,
distribution management, managment, telemarketing, marketing, marketing surveys, surveys, leads,
lead qualification, seminar, seminar recruitment, business development
|
©1999-2002 [fill in company name] All Rights Reserved |
contact
webmaster
| powered by
corezon
|
|
All logos and trademarks are properties of their respective companies. Product price,
specification, warranty and availability subject to change without notice.
|
|
|