Go to Our Web Site    
This is our product index page. Please use this
keyword searching to narrow down the result.
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Mfg. Name Mfg. Part# Product Unit Price Add To Cart
 
HP / Agilent 37701B HP / Agilent 37701B T1 / Datacom Tester Contact Sales
37701B T1/Datacom tester offers complete T1 and fractional T1 bit-error and signal measurements. It also generates tones in a channel and allows VF signals in any timeslot to be monitored. Test results are preselected using easy-to-read bar charts, allowing quick analysis of the circuit trouble. Tests can be performed using auto configure or stored user setups for fast and easy testing. Optional pulse shape and clock slip analysis allow quick, graphic interpretation of distortion and timing problems. DTE/DCE interface and measurements can be added for datacom testing.
 
HP / Agilent 37741A HP / Agilent 37741A DS1 Tester Contact Sales
The HP 37741A DS1 Tester gives you the power of a full-size T1 test set in the palm of your hand. It features single keystroke configuration and results reporting. With the 8 bicolor LEDs and large LCD display see the received signal's status in real time. Extensive T1 and FT1 signal generation and analysis, simplified line and path test, and addressable repeater control are included.Whether you're measuring tariffed parameters or locating hard-to-find T1 faults, the HP 37741A gives you capability rarely found in such a small, handheld unit. You'll find the tester really simple to use. The larger-than-average screen cleverly solves the problem of giving you rapid access to all test results. Add to this results printing and storage and long-life battery operation and you'll really appreciate the tester's capability
 
HP / Agilent 3782B HP / Agilent 3782B Error Detector Test Set Contact Sales
Performs error ratio, error count, error seconds and error-free seconds measurements. At the DS-3 level, it can perform in-service or out-of-service measurements of parity errors within the digital transmission system.
 
HP / Agilent 3789B HP / Agilent 3789B DS3 Transmission Test Set Contact Sales
The 3789B DS3 Transmission Test Set is a powerful test set offering outstanding monitoring and troubleshooting capabilities. A built-in demultiplexer allows it to perform measurements on both DS1 and DS3 signals from a DS3 access point. On equipment using C-bit parity frame format, the unit can measure the end-to-end performance of a transmission path in both directions simultaneously from a single access point. The instrument can operate with test patterns that are unframed or framed in M13 or C-bit parity format. A comprehensive error injection facility allows for stress-testing of equipment and interfaces. It can generate and detect the DS3 Idle signal.
 
HP / Agilent E4480A HP / Agilent E4480A CERJAC 156MTS SONET Tester Contact Sales
The portable, lightweight HP CERJAC 156MTS SONET Maintenance Test Set combines digital transmission testing capabilities with SONET-specific tests to meet your SONET and T-carrier applications in the field. You can use the base unit for STS-1 testing with full receive/transmit functions and you can drop and insert DS3 payloads. OC-1, OC-3 and OC-12 interfaces, or DS3, DS1 and E1 ports, can be added as required. Intermediate and longreach optical interfaces support 1310 or 1550 nm wavelengths.Features include section, line and path error injection at user-selectable rates and SONET overhead control and monitoring. You can use the HP CERJAC 156MTS during SONET installation to test channel rates from DS0 to OC-12 with full demultiplexing of tributary signals. ATM is available for OC-3c and DS3 rates. Also, you can verify network synchronization and automatic protection switching.
 
HP / Agilent J2300C HP / Agilent J2300C Internet Advisor WAN Contact Sales
The HP Internet Advisor WAN offers integrated WAN and LAN over WAN protocol analysis capabilities, along with bit error rate testing, stimulus and response measurements, and statistical analysis capability. The J2300C captures every frame on your network. It non-intrusively monitors and decodes WAN and LAN over WAN data at full line speed, without missing a bit. In addition, it can simulate either direction of a line under test, and process previously captured data from the buffer or from a file. Analyzes Frame Relay, ISDN, X.25, SMDS, LAN over WAN, PPP, legacy WAN networks. All major WAN interfaces, including RS232C/V.24, RS449/422/423, V.10/V.11, and V.35, are built-in. Call for availability of other interfaces.
 
HP / Agilent J3446C HP / Agilent J3446C Internet Advisor LAN Contact Sales
The HP Internet Advisor LAN is a portable, PC-based, full-featured network analyzer that allows users to install, support and maintain local area networks (LAN), by providing powerful features and a Windows? interface.Comprehensive test and analysis solutions for 10/100 Mbps Ethernet, 10/100 Mbps Switched Ethernet, 10/100 full-duplex Ethernet, Gigabit Ethernet, 4/16 Mbps Token-Ring, and FDDI.All major protocol stacks supported on all media. More than 100 statistical parameters measured. All media interfaces have hardware filtering and RISC analysis processors for uncompromised data-capture performance.
 
Anritsu MP1763C Pulse Pattern Generator / Error Detector System Contact Sales
The MP1763C/MP1764C are 12.5 Gbit/s BERTS (Bit Error Rate Test Set) developed for evaluation and inspection of 10 Gbit/s transmission equipment, modules, and devices.
 
Anritsu MP1764C Pulse Pattern Generator / Error Detector System Contact Sales
One MP1763C/MP1764C can cover the band from STM-0/STS-1 to STM-64/STS-192 and can be used with 11 Gbit/s optical submarine transmission
 
Tektronix K1297 Tektronix K1297 Protocol Tester Contact Sales
The K1297 Protocol Tester provides very flexible modular hardware and software platforms for monitoring, simulating and emulating network traffic. A selection of interface modules and software packages allow testing of most interfaces in mobile, core and access networks. The K1297 performs monitoring, simulation and emulation, including network element emulation and interdependence testing.
 
Tektronix ST2400 Tektronix ST2400 DWDM Test Set Contact Sales
n/a
 



reseller, reseller channel development, channel development, reseller development, distribution, distribution management, managment, telemarketing, marketing, marketing surveys, surveys, leads, lead qualification, seminar, seminar recruitment, business development


©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.