Go to Our Web Site    
This is our product index page. Please use this
keyword searching to narrow down the result.
   Advanced Search
 
<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>
Category  : Pulse Generators

Mfg. Name Mfg. Part# Product Unit Price Add To Cart
 
HP / Agilent 214B HP / Agilent 214B Pulse Generator Contact Sales
n/a
 
HP / Agilent 70330A HP / Agilent 70330A Pulse Generator Contact Sales
300 MHz timing with variable width and delay. Variable transitions down to 1 ns. 10 ps timing resolution. Dual-channel timing. 5 V amplitude into 50 ohms. Plugs into an HP 70000-Series Modular Measurement System mainframe.
 
HP / Agilent 70332A HP / Agilent 70332A Multiple Clock Generator Contact Sales
Up to 100 MHz pulses with independent width and delay. 2 channels, each with 16 differential ECL inputs. Skew of < 1 ns between all outputs of one channel. Plugs into an HP 70000-Series Modular Measurement System mainframe.
 
HP / Agilent 81101A HP / Agilent 81101A Pulse Generators Contact Sales
The Agilent 81100A Series of programmable pulse generators are highly accurate one or two channel pulse generators. They provide clean, accurate pulses with excellent repeatability. Timing changes are free of glitches and drop outs, even at the maximum frequencies of 50 or 80 MHz. These pulse generators also features fast, variable transition times, flexible amplitudes and duty cyclesThe Agilent 81100A family generates all of the standard pulses needed to test current logic technologies (CMOS, TTL, ECL, etc). You can save test settings and program the 81101A or 81104A for automated test routines. In addition, the 81101/04A¡¯s programs can be used on other pulse/pattern generators in the 81100A family.The 81101A features a clear graphical display, autoset, help, store/recall. Preset TTL/ECL levels, selectable units (such as current/voltage, width/duty-cycle), and load compensation. Values can be entered , exceeding the specified range, to fully exploit the hardware limits. The user interface includes warning messages, error messages, help key and non-volatile memory for nine settings.Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output provides continuous pulses, double pulses or bursts (single or double pulses). One input (BNC connector at rear panel) is used for clock input or alternatively for PLL.The 81101A and 81104A belong to the Agilent 81100 family of pulse/pattern generators which feature the same programming and user interfaces that are compatible with the well-established 8110A. Three year warranty.
 
HP / Agilent 81104A HP / Agilent 81104A Pulse Generators Contact Sales
The 81104A 80 MHz Pulse/Pattern Generator also generates all the standard pulses and digital patterns (CMOS, TTL, LVDS, ECL etc.). With the optional second channel, multi-level and multi-timing signals up to 60 MHz can be generated using the internal channel addition feature. Pragmatically, channel 2 can be added to channel 1 internally (In this case the second output is disabled.) The additional fixed delay on the second channel is typically 2.5 ns.Level parameters can be entered as voltage or current, as high and low level, or as offset and amplitude. The output provides continuous pulses, double pulses or bursts (single or double pulses). One input (BNC connector at rear panel) is used for clock input or alternatively for PLL.The 81101A and 81104A belong to the Agilent 81100 family of pulse/pattern generators which feature the same programming and user interfaces that are compatible with the well-established 8110A. Three year warranty.
 
HP / Agilent 8112A HP / Agilent 8112A Pulse Generator Contact Sales
n/a
 
HP / Agilent 8114A HP / Agilent 8114A High Power Pulse Generator Contact Sales
The Agilent 8114A programmable pulse generator delivers fast-transition 100 V pulses into 50 ohm loads at rates of up to 15 MHz. In addition to simulating transients and glitches, it is well-equipped to characterize and test devices requiring high voltage or current pulses, such as flash memories, power MOS devices, IR/laser diodes and radar devices.
 
HP / Agilent 8130A HP / Agilent 8130A Pulse Generator Contact Sales
n/a
 
HP / Agilent 8131A HP / Agilent 8131A Pulse Generator Contact Sales
n/a
 
HP / Agilent 8133A HP / Agilent 8133A Timing Generator Contact Sales
When timing is critical, the ability to characterize a digital product begins and ends with accurate edge-placement of the test signal. The Agilent 8133A timing generator, 33 MHz to 3 GHz makes an outstanding contribution through high resolution (1 ps) very low jitter and very fast linear transitions.
 
HP / Agilent 8160A HP / Agilent 8160A Pulse Generator Contact Sales
20 ns (50 MHz) to 999 ?s period, 6 ns to 9.99 ms variable transition time, counted burst mode. 20 V p-p output. Fully HP-IB.
 
HP / Agilent 8161A HP / Agilent 8161A Pulse Generator Contact Sales
10 ns (100 MHz) to 980 ms period, 1.3 ns to 900 ?s variable transition time, counted burst mode. 5 V p-p output. Fully HP-IB
 
HP / Agilent 8175A HP / Agilent 8175A Digital Signal Generator Contact Sales
High-speed parallel and serial data simulation with programmable patterns. 24 parallel and 2 serial channels. Requires appropriate output pods for ECL, TTL, or CMOS - Contact us for availability
 
HP / Agilent 81110A Pulse Pattern Generator $8,148.32
The Agilent 81110A with one or two Agilent 81111A output modules is a single/dual-channel 165 MHz Pulse Pattern Generator. It is the replacement of the industry-standard Agilent 8110A and provides increased performance for less money. In comparison to the Agilent 81104A, the 81110A offers the same performance on a wider frequency range. Delay and pulse width and repetition rate in non-PLL mode are more accurate (3% or 0.5% with self-calibration). Alternatively, the Agilent 81110A with one or two Agilent 81112A output modules is a single/dual-channel 330 MHz Pulse Pattern Generator. Instead of variable transitions, 800 ps or 1.6 ns edges are selectable. The output impedance is 50 Ohm and provides up to 3.8 Vpp into 50 Ohm. Internal channel addition is not available.
 
HP / Agilent 81112A Pulse Pattern Generator Output Channel $4,845.44
Pulse Pattern Generator FG Output Channel
 
Tektronix Tektronix AWG610 Pulse Generator Contact Sales
n/a
 
Tektronix Tektronix HFS9000 Programmable Stimulus System Contact Sales
n/a
 



reseller, reseller channel development, channel development, reseller development, distribution, distribution management, managment, telemarketing, marketing, marketing surveys, surveys, leads, lead qualification, seminar, seminar recruitment, business development


©1999-2002 [fill in company name] All Rights Reserved contact webmaster | powered by corezon
All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.