|
Mfg. Name |
Mfg. Part# |
Product |
Unit Price |
Add To Cart |
| |
| |
Anritsu
|
37269C/03/10A
|
Anritsu 37269C/03/10A Vector Network Analyzer
|
Contact Sales
|
|
|
|
| |
| |
Anritsu
|
37347C
|
Anritsu 37347C Vector Network Analyzer
|
Contact Sales
|
|
|
|
| |
| |
Anritsu
|
37397C/06/11/2A
|
Anritsu 37397C/06/11/2A Vector Network Analyzer
|
Contact Sales
|
|
|
|
| |
| |
HP / Agilent
|
8515A
|
HP / Agilent 8515A S-Parameter Test Sets
|
Contact Sales
|
|
|
The Agilent S-Parameter Test Sets are available for the 8510 Network Analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. |
| |
| |
HP / Agilent
|
35677A
|
HP / Agilent 35677A S-Parameter Test Set
|
Contact Sales
|
|
|
For use with the HP 3577 Network Analyzer. 50 Ohm impedance |
| |
| |
HP / Agilent
|
35677B
|
HP / Agilent 35677B S-Parameter Test Set
|
Contact Sales
|
|
|
For use with the HP 3577 Network Analyzer. 75 Ohm impedance |
| |
| |
HP / Agilent
|
3575A
|
HP / Agilent 3575A Gain Phase Meter
|
Contact Sales
|
|
|
Performs magnitude and phase measurements of gain/loss, transfer functions, impedance, and other signal ratios. It is useful to measure the response of feedback amplifiers and control systems for determining stability margins or creating Bode plots. It's broadband capability allows easy measurement of mixers and doublers where the input and output frequencies are different. Can be used to measure absolute signal levels at either of its two inputs. 1 Hz to 13 MHz, 2-channels. Resolution to 0.1dB and 0.1 degree. Input range 200 ?V to 20 Vrms. |
| |
| |
HP / Agilent
|
3577A
|
HP / Agilent 3577A Network Analyzer
|
Contact Sales
|
|
|
5 Hz to 200 MHz. Resolution to 0.001 dB, 0.005 Deg., 1 ps, & 0.001 Hz. Magnitude, phase, polar, real, imaginary, & group delay modes. HP-IB. Also available - 35677A/B S-Parameter Test Set. |
| |
| |
HP / Agilent
|
3577B
|
HP / Agilent 3577B Network Analyzer
|
Contact Sales
|
|
|
Measure magnitude and phase, insertion loss, group delay and SWR from 5 Hz to 200 MHz. Can also measure return loss, reflection coefficient and impedance when used with a reflection and transmission kit. HP-IB. Also available - 35677A/B S-Parameter Test Set. |
| |
| |
HP / Agilent
|
4195A
|
HP / Agilent 4195A Network/Spectrum Analyzer
|
Contact Sales
|
|
|
Combined vector network and spectrum analysis capabilities. The frequency covered is from 10 Hz through 500 MHz with 0.001 Hz resolution for audio, baseband, HF, VHF, and IF applications. It directly measures amplitude ratio, phase, group delay, and spectrum level needed for characterizing linear/non-linear analog circuits or components. A color display allows you to readily differentiate among multiple traces. A built-in 3.5 inch disk application can save the instrument state, data and user functions. With the optional 41951A Impedance Test Kit , you can measure Z, Y, Phase, R, X, G, B, L, C, D, Q(1/D). HP-IB. |
| |
| |
HP / Agilent
|
4395A
|
HP / Agilent 4395A Impedance Analyzer
|
Contact Sales
|
|
|
The 4395A provides excellent vector network, spectrum, and optional impedance measurements for lab and production applications. Gain, phase, group delay, distortion, spurious, CN, and noise measurements often required for evaluating components and circuits can be measured using one instrument. When combined with a test set, the 4395A provides reflection measurements, such as return loss, SWR, and S parameters. As a vector network analyzer, the Agilent 4395A operates from 10Hz to 500 MHz with 1 mHz resolution; and its integrated synthesized source provides -50 to +15dBm of output power with 0.1 dB resolution. The dynamic magnitude and phase accuracy are ¡À0.05dB and ¡À0.3deg. so that it can accurately measure gain and group delay flatness, which are becoming more important in modern electronics systems. As a spectrum analyzer, the 4395A operates from 10 Hz to 500 MHz with resolution bandwidths (RBWs) spanning 1 Hz to 1 MHz in a 1-3-10 steps. A fully-synthesized local oscillator allows stable and accurate frequency analysis. Direct A/D conversion (no LOG amplifier is used) results in ¡À0.8 dB level accuracy (@50 MHz, -20 dBm). Noise sidebands fall below -100 dBc/Hz @ 100 kHz offset from carriers, while sensitivity is -145 dBm/Hz at 10 MHz. |
| |
| |
HP / Agilent
|
4396A
|
HP / Agilent 4396A Network/Spectrum/Impedance Analyzer
|
Contact Sales
|
|
|
Network analysis from 100 kHz to 1.8 GHz, 1 mHz resolution, integrated source -60 to +20 dBm with 0.1 dB resolution. Measurements include: attenuation, bandwidth, center frequency, complex impedance, gain/loss, phase, linearity, VSWR and more. Spectrum analysis from 2 Hz to 1.8 GHz, 1 Hz to 3 MHz RBW. Spectrum analyzer measurements include adjacent channel power, carrier-to-noise, flatness, frequency, harmonic distortion, phase noise, occupied bandwidth, sensitivity, and more. HP-IB |
| |
| |
HP / Agilent
|
85044A
|
HP / Agilent 85044A Transmission/Reflection Test Set
|
Contact Sales
|
|
|
For 8753-Series. 300 kHz to 3 GHz, 50 Ohms. |
| |
| |
HP / Agilent
|
85044B
|
HP / Agilent 85044B Transmission/Reflection Test Set
|
Contact Sales
|
|
|
For 8753-Series. 300 kHz to 2 GHz, 75 Ohms. |
| |
| |
HP / Agilent
|
85046A
|
HP / Agilent 85046A S-Parameter Test Set
|
Contact Sales
|
|
|
For 8753-Series. 300 kHz to 3 GHz, 50 Ohms |
| |
| |
HP / Agilent
|
85046B
|
HP / Agilent 85046B S-Parameter Test Set
|
Contact Sales
|
|
|
For 8753-Series. 300 kHz to 3 GHz, 75 Ohms |
| |
| |
HP / Agilent
|
85047A
|
HP / Agilent 85047A S-Parameter Test Set
|
Contact Sales
|
|
|
300 kHz to 6 GHz, 50 Ohms. For 8753-Series. |
| |
| |
HP / Agilent
|
8508A
|
HP / Agilent 8508A Vector Voltmeter
|
Contact Sales
|
|
|
The 8508A vector voltmeter is a fully automatic tuned receiver that makes RF voltage and phase measurements easy. Its narrowband measuring technique gives a dynamic range of over 90 dB and a sensitivity of 10 ?V to trace even the smallest signal. This vector voltmeter also measures the phase difference between its two input channels with at least 0.1 degree resolution over a full +180 to -180 degree range, so they can be used for another complete set of measurements - such as electrical length, phase distortion, or impedance. |
| |
| |
HP / Agilent
|
85107B
|
HP / Agilent 85107B Network Analyzer System
|
Contact Sales
|
|
|
Complete system includes HP 8510C/010, 8517B, 83651B, Rack, all HP-IB and RF cables. |
| |
| |
HP / Agilent
|
8510B
|
HP / Agilent 8510B Vector Network Analyzer
|
Contact Sales
|
|
|
The 8510B Vector Network Analyzer continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the 8510B makes broadband measurements from 45 MHz to 40 GHz in coax, and to 110 GHz in waveguide bands. The 8510B network analyzer measures the magnitude, phase and group delay of two-port networks to characterize their linear behavior. Optionally, the 8510B network analyzer is also capable of displaying a network's time domain and response to an impulse or a step waveform by computing the inverse Fourier transform of the frequency domain response. Requires test set - call for availability. |
| |
| |
HP / Agilent
|
8510C
|
HP / Agilent 8510C Vector Network Analyzer
|
Contact Sales
|
|
|
The 8510C Vector Network Analyzer continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the 8510C makes broadband measurements from 45 MHz to 50 GHz in 2.4 mm coax, from 45 MHz to 65 GHz in 1.85 mm coax and from 33 GHz to 110 GHz in waveguide bands. The 8510C network analyzer measures the magnitude, phase and group delay of two-port networks to characterize their linear behavior. Optionally, the 8510C network analyzer is also capable of displaying a network's time domain and response to an impulse or a step waveform by computing the inverse Fourier transform of the frequency domain response. Requires test set - call for availability |
| |
| |
HP / Agilent
|
85110A
|
HP / Agilent 85110A Pulsed S-Parameter Test Set
|
Contact Sales
|
|
|
Pulsed measurements from 2 to 20 GHz at up to 20 Watts CW. For 8510-Series. |
| |
| |
HP / Agilent
|
8514B
|
HP / Agilent 8514B S-Parameter Test Sets
|
Contact Sales
|
|
|
The Agilent S-Parameter Test Sets are available for the 8510 Network Analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. |
| |
| |
HP / Agilent
|
8516A
|
HP / Agilent 8516A S-Parameter Test Set
|
Contact Sales
|
|
|
0.045 to 40 GHz, 50 Ohms. With IF Switching and Deleted Attenuator options. For 8510-Series |
| |
| |
HP / Agilent
|
8516A/002
|
HP / Agilent 8516A S-Parameter Test Sets
|
Contact Sales
|
|
|
The Agilent S-Parameter Test Sets are available for the 8510 Network Analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. |
| |
| |
HP / Agilent
|
8517B
|
HP / Agilent 8517B S-Parameter Test Sets
|
Contact Sales
|
|
|
The Agilent S-Parameter Test Sets are available for the 8510 Network Analyzer for broadband coaxial measurements from 45 MHz to 50 GHz. The test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors. |
| |
| |
HP / Agilent
|
8702A
|
HP / Agilent 8702A Lightwave Component Analyzer
|
Contact Sales
|
|
|
Characterizes the modulation transfer function from 300 kHz to 3 GHz at 1300 nm. HP-IB. |
| |
| |
HP / Agilent
|
8711A
|
HP / Agilent 8711A Network Analyzer
|
Contact Sales
|
|
|
Measure insertion and return loss, gain, conversion loss, power or SWR from 300 KHz to 1.3 GHz. Has integrated transmission/reflection test set and synthesized 1 Hz resolution source for complete swept frequency characterization of RF components. System dynamic range of 90 dB. Internal 3 1/2 disk drive. HP-IB. |
| |
| |
HP / Agilent
|
8712E
|
HP / Agilent 8712E Series Vector Network Analyzers
|
Contact Sales
|
|
|
The 8712/14ES features an S-parameter test set with full two-port vector-error correction, providing complete and accurate measurements of device S-parameters. Two independent channels can measure and display two parameters such as S21 (transmission) and S11 (reflection) in a variety of formats including delay and SWR, on retangular, polar or Smith-chart displays. |
| |
| |
HP / Agilent
|
8712ES
|
HP / Agilent 8712ES Vector Network Analyzer
|
Contact Sales
|
|
|
The 8712/14ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ advanced vector-error-correction techniques to enhance measurement accuracy. |
| |
| |
HP / Agilent
|
8712ET
|
HP / Agilent 8712ET Vector Network Analyzer
|
Contact Sales
|
|
|
The 8712/14ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ advanced vector-error-correction techniques to enhance measurement accuracy. |
| |
| |
HP / Agilent
|
8713C
|
HP / Agilent 8713C Network Analyzer
|
Contact Sales
|
|
|
Measure insertion and return loss, gain, conversion loss, power or SWR from 300 kHz to 3 GHz. Has integrated transmission/reflection test set and synthesized 1 Hz resolution source for complete swept frequency characterization of RF components. System dynamic range of >100 dB. Internal 3 1/2 disk drive. HP-IB. |
| |
| |
HP / Agilent
|
8714ES
|
HP / Agilent 8714ES Vector Network Analyzer
|
Contact Sales
|
|
|
The 8712/14ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ advanced vector-error-correction techniques to enhance measurement accuracy. |
| |
| |
HP / Agilent
|
8720D
|
HP / Agilent 8720D Vector Network Analyzer
|
Contact Sales
|
|
|
The HP 8720D vector network analyzer family combines a fast synthesized source, tuned receiver, and S-parameter test set in a single instrument. 50 MHz to 20 GHz frequency range, -70 dBm to +5 dBm dynamic range, 2 dB flatness. Quickly and accurately measures magnitude, phase, and group delay of all four S-parameters, plus the absolute output power of microwave components. HP-IB. |
| |
| |
HP / Agilent
|
8722D
|
HP / Agilent 8722D Vector Network Analyzer
|
Contact Sales
|
|
|
The HP 8722D vector network analyzer combines a fast synthesized source, tuned receiver, and S-parameter test set in a single instrument. 50 MHz to 40 GHz frequency range, -75 dBm to +5 dBm dynamic range, 2 dB flatness. Quickly and accurately measures magnitude, phase, and group delay of all four S-parameters, plus the absolute output power of microwave components. HP-IB. |
| |
| |
HP / Agilent
|
8722ES
|
HP / Agilent 8722ES Vector Network Analyzer
|
Contact Sales
|
|
|
The 8722ES vector network analyzer allows complete characterization of RF and microwave components. Includes an integrated synthesized source, test set and tuned receiver. The built-in S-parameter test set provides a full range of magnitude and phase measurements in both the forward and reverse directions. Built-in vector accuracy enhancement techniques include full two-port, adapter-removal, and optional TRL calibration. |
| |
| |
HP / Agilent
|
87510A
|
HP / Agilent 87510A Gain-Phase Analyzer
|
Contact Sales
|
|
|
n/a |
| |
| |
HP / Agilent
|
8751A
|
HP / Agilent 8751A Network Analyzer
|
Contact Sales
|
|
|
This high-throughput network analyzer has a 5 Hz to 500 MHz source with 1 mHz resolution. -50 to +15 dBm power output with 0.1 dB resolution, +/-0.02db dynamic accuracy. Use with external test sets like 87511A, 87511B for 50 ohm or 75 ohm testing. Color display, built-in floppy drive, HP-IB. |
| |
| |
HP / Agilent
|
8752A
|
HP / Agilent 8752A Network Analyzer
|
Contact Sales
|
|
|
n/a |
| |
| |
HP / Agilent
|
8752C
|
HP / Agilent 8752C Network Analyzer
|
Contact Sales
|
|
|
n/a |
| |
| |
HP / Agilent
|
8753C
|
HP / Agilent 8753C Network Analyzer
|
Contact Sales
|
|
|
Requires 85044, 85046 or 85047 test set. |
| |
| |
HP / Agilent
|
8753D
|
HP / Agilent 8753D Network Analyzer
|
Contact Sales
|
|
|
An exceptional network analyzer for device and component measurements in the 30 kHz to 6 GHz range. The 8753D's are vector network analyzers that provide magnitude and phase information, and can make group delay and time domain measurements as well. |
| |
| |
HP / Agilent
|
8753E
|
HP / Agilent 8753E Network Analyzer
|
Contact Sales
|
|
|
The 8753E is a vector network analyzer that provides magnitude and phase information, and can make group delay and time domain measurements as well. The 8753E's processor makes measurements and data transfers up to seven times faster than 8753D's or 8753C's. Overall throughput is enhanced by new features such as simultaneous four-parameter displays and adapter-removal calibration. |
| |
| |
HP / Agilent
|
8753ES
|
HP / Agilent 8753ES Network Analyzer
|
Contact Sales
|
|
|
The Agilent 8753ES vector network analyzer allows complete characterization of RF components. The 8753ES includes an integrated synthesized source, test set and tuned receiver. The built-in S-parameter test set provides a full range of magnitude and phase measurements in both the forward and reverse directions. Built-in vector accuracy enhancement techniques include full two-port calibration, adapter-removal and TRL/LRM calibration. |
| |
| |
HP / Agilent
|
8757C
|
HP / Agilent 8757C Scalar Network Analyzer
|
Contact Sales
|
|
|
Requires detectors, call for availability |
| |
| |
HP / Agilent
|
8757D
|
HP / Agilent 8757D Scalar Network Analyzer
|
Contact Sales
|
|
|
Requires detectors, call for availability. |
| |
| |
HP / Agilent
|
8757E
|
HP / Agilent 8757E Scalar Network Analyzer
|
Contact Sales
|
|
|
Requires detectors, call for availability. |
| |
| |
HP / Agilent
|
E5100B
|
HP / Agilent E5100B High-Speed Network Analyzer
|
Contact Sales
|
|
|
Designed for production line testing of resonators and filters. Provides faster measurements with lower fluctuations because of its low noise performance and fine selection IFBW. |
| |
| |
HP / Agilent
|
E8358A
|
HP / Agilent E8358A Newtork Analyzer
|
Contact Sales
|
|
|
The Agilent E8358A vector network analyzer is a member of the PNA Series network analyzer platform and provides the combination of speed and precision for the demanding needs of today's high-performance component test requirements. The PNA Series meets this testing challenge by providing the right combination of fast sweep speeds, wide dynamic range, low trace noise and flexible connectivity. The E8358A provides TRL/LRM calibration (four-receiver enabled) for in-fixture and on-wafer devices, standard bias-tees for active devices and standard direct receiver access for extended dynamic range. Powerful automation and self-help tools make the instrument well suited for both R&D and manufacturing. The PNA Series features sixteen independent measurement channels, built-in hard drive and supplied mouse |
| |
| |
Anritsu
|
MP4630B
|
Network Analyzer
|
Contact Sales
|
|
|
The MS4630B is suitable for electronics production lines demanding fast and accurate device measurements. It is particularly well suited to accurate, high-speed evaluation of IF filter resonance and group delay characteristics, as well as evaluating the impedance characteristics of resonators in AV equipment and personal computers.A fast sweep speed of 150 ?s/measurement point is achieved using a high-speed synthesizer and digital signal processing (DSP) tech-nologies. The post-processing data analysis functions have been strengthened with improved data-processing macros that have greatly increased the total production throughput. In comparison to the earlier MS3401A/B and MS3606B network analyzers, the sweep speed is three times faster and the group delay measurement accuracy and stability have been improved by more than 10 times. In addition, the dynamic range has been improved to 120 dB (RBW: 1 kHz) while the weight of the analyzer has been dramatically reduced. Compatibility has been maintained between PTA and GPIB software commands, maintaining any current investment in PTA software |
| |
| |
Anritsu
|
MS4662A
|
Network Analyzer
|
Contact Sales
|
|
|
N/A |
| |
| |
HP / Agilent
|
8711C-1C2-1CL-1E1
|
Network Analyzer 300 kHz to 1300 MHz
|
Contact Sales
|
|
|
n/a |
| |
| |
HP / Agilent
|
8752C-3
|
Network Analyzer, 300 kHz to 1.3 GHz
|
Contact Sales
|
|
|
n/a |
| |
| |
HP / Agilent
|
8753E
|
Network Analyzer, 300 kHz to 3 GHz.
|
Contact Sales
|
|
|
Network Analyzer, 300 kHz to 3 GHz. |
| |
| |
HP / Agilent
|
8753D
|
Network Analyzer, 300 kHz to 3/6 GHz
|
Contact Sales
|
|
|
Network Analyzer, 300 kHz to 3/6 GHz |
| |
| |
HP / Agilent
|
8714C-1E1
|
Network analyzer, 300kHz to 3 GHz.
|
Contact Sales
|
|
|
Network analyzer, 300kHz to 3 GHz. |
| |
| |
HP / Agilent
|
87511A
|
S-Parameter Test Set for 8751, 50 Ohm, 7 mm
|
Contact Sales
|
|
|
S-Parameter Test Set for 8751, 50 Ohm, 7 mm |
| |
| |
HP / Agilent
|
8757D
|
Scalar Network Analyzer, 10 MHz to 40 GHz
|
Contact Sales
|
|
|
Scalar Network Analyzer, 10 MHz to 40 GHz |
| |
| |
HP / Agilent
|
8757D-1-2
|
Scalar Network Analyzer, 10 MHz to 40 GHz
|
Contact Sales
|
|
|
Scalar Network Analyzer, 10 MHz to 40 GHz |
| |
| |
Rohde & Schwarz
|
ZVCE-B4-B6-B7-B21-B23-B24-B25
|
Vector Network Analyzer, 20 kHz to 8 GHz
|
Contact Sales
|
|
|
Vector Network Analyzer, 20 kHz to 8 GHz |
| |
| |
Anritsu
|
37200C
|
Vector Network Analyzers
|
Contact Sales
|
|
|
|
| |
| |
Anritsu
|
37300C Series
|
Vector Network Analyzers
|
Contact Sales
|
|
|
|
| |
