TERINC - Test and Measurement Equipments Remarketers, HP / Agilent, Anritsu, 8A, SDB

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%>

Mfg. Name	Mfg. Part#	Product	Unit Price	Add To Cart

HP / Agilent	11975A	HP / Agilent 11975A Microwave Amplifier	Contact Sales
2 to 8 GHz, 40 mW (+16 dBm) output. Adjustable output leveling control

HP / Agilent	83050A	HP / Agilent 83050A Microwave System Amplifier	Contact Sales
The 83050A Microwave System Amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 2 to 50 GHz allows the designer to replace several narrow bandwidth amplifiers with a single amplifier, eliminating the need for crossover networks or multiple bias supplies

HP / Agilent	8347A	HP / Agilent 8347A RF Amplifier	Contact Sales
A general-purpose broadband instrumentation amplifier capable of providing gain and power to overcome systematic RF losses, drive high-power devices and improve measurement system performance. The 8347A can be used to increase low-level sweep speed in increased dynamic range measurements using a network analyzer

HP / Agilent	8348A	HP / Agilent 8348A Microwave Amplifier	Contact Sales
A 300 mW amplifier that operates from 2.0 GHz to 26.5 GHz. <13 dB typical noise figure.Frequency Range Power1.0 to 2.0 GHz > +20 dBm (typical) 2.0 to 20 GHz > +25 dBm 20 to 26.5 GHz > +23 dBm

HP / Agilent	8349B	HP / Agilent 8349B Microwave Amplifier	Contact Sales
The 8349B amplifier will only be available until July 31, 2003. July 31 will be last day to place an order for a lifetime buy for these products. Agilent will continue to support these products for the five years following their July 31, 2003 discontinuance date. While there is no direct replacement for these products, Agilent offers several other amplifiers that may meet your needs. Please visit our web-based catalog and browse the amplifier category. For more: http://www.agilent.com/find/accessories The Agilent 8349B microwave amplifier is capable of providing gain and power to overcome systematic RF losses, drive high-power devices, improve measurement system performance, and drive millimeter-wave source modules. The Agilent 8349B can be used to increase low-level sweep speed in increased dynamic range measurements using a network analyzer

Tektronix	11A32	Tektronix 11A32 Vertical Amplifier	Contact Sales
DC to 400 MHz (in 11402 mainframe, @ >10 mV/div), two channels, 1 mV to 10 V/div, กภ10 div DC offset, switchable 1 Megohm or 50 Ohm input mainframes.

Tektronix	11A34	Tektronix 11A34 Vertical Amplifier	Contact Sales
DC to 300 MHz (>10 mV/div), 1 mV to 10 V/div. DC offset provides an effective screen height of up to 2,000 divisions. Switchable 50 Ohms/1 Megohm input impedance. For 11000, DSA, and CSA Series mainframes.

Tektronix	11A72	Tektronix 11A72 Vertical Amplifier	Contact Sales
DC to 1 GHz, 2 channels. For 11000- and DSA600-Series Mainframes

Tektronix	ADA400A	Tektronix ADA400A Differential Preamplifier	Contact Sales
Accurately measure signals down to 5?VThe ADA400A Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit. The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5 ?V, even in high noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies, and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test setup. An infinite impedance mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance. Special circuitry greatly reduces annoying DC drift common in older differential preamplifiers. The ADA400A is powered directly from the TDS 400, TDS 500, TDS 600, 700 and 3000 Series oscilloscopes. It can also be used with other oscilloscopes when powered by a 1103 Probe Power Supply. Includes: 070-9164-00 Instruction Manual, 159-0024-00 Spare Input Fuses (2). Specifications Gain: X100, X10, X1, X0.1 CMRR: >/=100,000:1 DC - 10 kHz Bandwidth Limits: 100 Hz, 3 kHz, 100 kHz, Full (>/=1 MHz) Input Impedance: 1 Megohm in parallel with approx. 50 pF (infinity ohms selectable in 100X and 10X gains)

Tektronix	AM502	Tektronix AM502 Differential Amplifier	Contact Sales
DC to 1 MHz, selectable HF & LF -3 dB points from 100 Hz to 1 MHz, 1 to 10,000 gain, 100 dB CMRR. Plugs into TM500-Series Mainframes.

Tektronix	TCPA300	Tektronix TCPA300 Current Probe Amplifier	Contact Sales
Increased performance and simplicityThe TCP300 and TCP400 series AC/DC Current Measurement family is a highly advanced current measurement system for today's current measurement needs. The split-core probes incorporate both transformer and Hall effect technology to provide broad bandwidth measurement capabilities from DC up to 100 MHz at current levels as low as 1 milliamp to thousands of amps (when used with CT4 current transformer). When connected to Tektronix TDS Oscilloscopes with TEKPROBE Level II or TekConnect (w/TCA-BNC) interfaces, current measurements and calculations are simple and easy.Additional measurement power is available with add on software such as the TDSPWR2 power measurements package. With all this measurement power current measurements have never been easier.Meets today's AC/DC current measurement applicationsThe TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provide a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A, and 150A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC.Measurement errors and manual calculations are now a thing of the pastWith this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS400A, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000 Series oscilloscope systems. TDS series oscilloscopes provide on-screen scaling and units. Status LEDs quickly show you TCP300/400 Series operating status or potential error conditions that may have caused measurement errors in the past.The TCP300/TCP400 Current Measurement Systems seamlessly integrate with your TDS series oscilloscope and the TDSPWR2 software package to easily make those time consuming power measurements and calculations for you.Non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.All TCP300/TCP400 Current Probes Include:Instruction sheet, probe cover, certificate of traceable calibration.All TCPA300/TCPA400 Current Probe Amplifiers Include:Instruction/service manual, TEKPROBE interface cable, Male to Male BNC cable (50 Ohm), 50 Ohm feed-through termination, certificate of traceable calibration.

Tektronix	TCPA400	Tektronix TCPA400 Current Probe Amplifier	Contact Sales
Increased performance and simplicityThe TCP300 and TCP400 series AC/DC Current Measurement family is a highly advanced current measurement system for today's current measurement needs. The split-core probes incorporate both transformer and Hall effect technology to provide broad bandwidth measurement capabilities from DC up to 100 MHz at current levels as low as 1 milliamp to thousands of amps (when used with CT4 current transformer). When connected to Tektronix TDS Oscilloscopes with TEKPROBE Level II or TekConnect (w/TCA-BNC) interfaces, current measurements and calculations are simple and easy.Additional measurement power is available with add on software such as the TDSPWR2 power measurements package. With all this measurement power current measurements have never been easier.Meets today's AC/DC current measurement applicationsThe TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provide a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A, and 150A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC.Measurement errors and manual calculations are now a thing of the pastWith this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS400A, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000 Series oscilloscope systems. TDS series oscilloscopes provide on-screen scaling and units. Status LEDs quickly show you TCP300/400 Series operating status or potential error conditions that may have caused measurement errors in the past.The TCP300/TCP400 Current Measurement Systems seamlessly integrate with your TDS series oscilloscope and the TDSPWR2 software package to easily make those time consuming power measurements and calculations for you.Non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.All TCP300/TCP400 Current Probes Include:Instruction sheet, probe cover, certificate of traceable calibration.All TCPA300/TCPA400 Current Probe Amplifiers Include:Instruction/service manual, TEKPROBE interface cable, Male to Male BNC cable (50 Ohm), 50 Ohm feed-through termination, certificate of traceable calibration.

reseller, reseller channel development, channel development, reseller development, distribution, distribution management, managment, telemarketing, marketing, marketing surveys, surveys, leads, lead qualification, seminar, seminar recruitment, business development

contact webmaster | powered by corezon

All logos and trademarks are properties of their respective companies. Product price, specification, warranty and availability subject to change without notice.

		Go to Our Web Site
		This is our product index page. Please use this keyword searching to narrow down the result.	Advanced Search