Go to Our Web Site
		This is our product index page. Please use this keyword searching to narrow down the result.	Advanced Search

<%-- ************************************************************ HTML Content Started Here ************************************************************ --%> Category  : Accessories Mfg. Name Mfg. Part# Product Unit Price Add To Cart   HP / Agilent 3750A 75 Ohm Attenuator Set Contact Sales n/a   HP / Agilent 11853A Accessory Kit, 50 Ohm, Type-N Contact Sales n/a   TTC / Acterna CB-10615 Acterna Cable Accessories Contact Sales n/a   TTC / Acterna AC-31905 Acterna Cable Accessories Contact Sales n/a   TTC / Acterna CB-10648 Acterna Cable Accessories Contact Sales n/a   Tektronix P6209 Active Probe 4 GHz Contact Sales n/a   Tektronix P6249 Active Probe, 4 GHz Contact Sales n/a   ANR 15NNF50-1.5C Anritsu Armored Test Cables $0.00 Anritsu 15NNF50-1.5C 90 Days 1.5 meter, N/M to N/F, 6 GHz, 50 Ohm   ANR 26UA137 Anritsu Microwave Components & Adapters $0.00 Anritsu 26UA137 1 Year Precision Waveguide Load. 5.85 - 8.2 GHz. 50 Ohm   HP / Agilent Calibration Calibration $0.00 Calibration Charge   HP / Agilent 85033e Calibration Kit $2,912.66 Calibration Kit   FLUKE 80I-110S Clamp on AC/DC Current probe $378.40 Clamp-on AC/DC Current Probe   HP / Agilent 11940A Close-Field Probe Contact Sales n/a   HP / Agilent 11941A Close-Field Probe Contact Sales n/a   Tektronix P6434 Data Acquisition Probe for TLA7XX Contact Sales Data Acquisition Probe for TLA7XX   HP / Agilent 776D Dual Directional Coupler, 0.94 to 1.90 GHz Contact Sales n/a   Tektronix P6204 FET Probe, 1 GHz, 10X Contact Sales n/a   FLUKE 80AK Fluke 80AK Thermocouple Adapter Contact Sales Adapts thermocouple mini-plug to banana plugs.For Fluke Models 187/189 and 16.   FLUKE 80BK Fluke 80BK Integrated Temperature Probe Contact Sales n/a   FLUKE 80PK Series Fluke 80PK Series Temperature Probes Contact Sales 80PK-1 General Purpose Bead ProbeGood accuracy and fast response. Not for liquid immersion.-40 to 260¡ãC (-40 to 500¡ãF)80PK-2A Immersion ProbeGeneral-purpose, including liquids and gels.-40 to 982¡ãC (-40 to 1800¡ãF)80PK-3A Flat Surface ProbeFor measuring flat or slightly convex surfaces. Exposed junction for direct surface contact.0 to 260¡ãC (32 to 500¡ãF)80PK-4A Air ProbeFor air and non-caustic gas applications. Probe constructed of 304 stainless steel with perforated baffle around measurement bead.-40 to 816¡ãC (-40 to 1500¡ãF) 80PK-4A Air ProbeFor air and non-caustic gas applications. Probe constructed of 304 stainless steel with perforated baffle around measurement bead.-40 to 816¡ãC (-40 to 1500¡ãF) 80PK-6A Exposed Junction ProbeUse as a surface probe or insertion into air and non-corrosive gases. Probe made of 304 stainless steel.-40 to 816¡ãC (-40 to 1500¡ãF)80PK-7 Industrial / Heavy Duty Surface ProbeFor flat or slightly curved surfaces. Exposed junction for direct surface contact.-127 to 600¡ãC (-196 to 1112¡ãF)80PK-8 Pipe Clamp ProbeFor pipe surfaces from 6.4 mm (1/4) to 34.9 mm (1-3/8) diameter. Spring-action jaw.-29 to 149¡ãC (-20 to 300¡ãF)80PK-9 General Purpose ProbeSurface probe and for insertion into air and non-caustic gas environments. Probe made of 304 stainless steel.-40 to 260¡ãC (-40 to 500¡ãF) 80PK-EXT Extension Wire KitFor extending and repairing K-type thermocouple wires. Includes 3 meters (approx. 9 feet) of thermocouple wire and 1 pair of male/female mini-connectors.Max. to 260¡ãC (500¡ãF) 80PK-IR Infrared ProbeMeasures the temperature of objects that can't be touched. Senses infrared energy emitted by an object.-18 to 260¡ãC (0 to 500¡ã F)   FLUKE 80PK-1 Fluke 80PK-1 General Purpose Bead Probe Contact Sales Good accuracy and fast response. Not for liquid immersion.-40 to 260¡ãC (-40 to 500¡ãF)   FLUKE 80PK-2A Fluke 80PK-2A Immersion Probe Contact Sales General-purpose, including liquids and gels.-40 to 982¡ãC (-40 to 1800¡ãF)   FLUKE 80PK-3A Fluke 80PK-3A Flat Surface Probe Contact Sales For measuring flat or slightly convex surfaces. Exposed junction for direct surface contact.0 to 260¡ãC (32 to 500¡ãF)   FLUKE 80PK-4A Fluke 80PK-4A Air Probe Contact Sales For air and non-caustic gas applications. Probe constructed of 304 stainless steel with perforated baffle around measurement bead.-40 to 816¡ãC (-40 to 1500¡ãF)   FLUKE 80PK-5A Fluke 80PK-5A Piercing Probe Contact Sales Made of 316 stainless steel suitable for food service. Also suitable for liquids and gels.-196¡ãC to 816¡ãC (-320¡ãF to 1500¡ãF)   FLUKE 80PK-6A Fluke 80PK-6A Exposed Junction Probe Contact Sales Use as a surface probe or insertion into air and non-corrosive gases. Probe made of 304 stainless steel.-40 to 816¡ãC (-40 to 1500¡ãF)   FLUKE 80PK-7A Fluke 80PK-7 Heavy Duty Surface Probe Contact Sales For flat or slightly curved surfaces. Exposed junction for direct surface contact.-127 to 600¡ãC (-196 to 1112¡ãF)   FLUKE 80PK-8A Fluke 80PK-8 Pipe Clamp Probe Contact Sales For pipe surfaces from 6.4 mm (1/4) to 34.9 mm (1-3/8) diameter. Spring-action jaw.-29 to 149¡ãC (-20 to 300¡ãF)   FLUKE 80PK-9A Fluke 80PK-9 General Purpose Probe Contact Sales Surface probe and for insertion into air and non-caustic gas environments. Probe made of 304 stainless steel.-40 to 260¡ãC (-40 to 500¡ãF)   FLUKE 80PK-EXT Fluke 80PK-EXT Extension Wire Kit Contact Sales Surface probe and for insertion into air and non-caustic gas environments. Probe made of 304 stainless steel.-40 to 260¡ãC (-40 to 500¡ãF)   FLUKE 80PK-IR Fluke 80PK-IR Infrared Probe Contact Sales Measures the temperature of objects that can't be touched. Senses infrared energy emitted by an object.-18 to 260¡ãC (0 to 500¡ã F)   FLUKE 80T-150U Fluke 80T-150U Universal Temperature Probe Contact Sales n/a   FLUKE 80T-IR Fluke 80T-IR Non-Contact Temperature Probe Contact Sales n/a   FLUKE 80TK Fluke 80TK Thermocouple Module Contact Sales Measurement Range-50¡ãC to 1000¡ãC (-58¡ãF to 1832¡ãF), depending on thermocouple probe used.Accuracy*-50¡ãC to -20¡ãC: 2.5% ¡À 2¡ãC-58¡ãF to -4.0¡ãF: 2.5% ¡À 3.6¡ãF-20¡ãC to 350¡ãC: 0.5% ¡À 2¡ãC-40¡ãF to 662¡ãF: 0.5% ¡À 3.6¡ãF350¡ãC to 500¡ãC: 1.75% ¡À 2¡ãC662¡ãF to 932¡ãF: 1.75% ¡À 3.6¡ãF500¡ãC to 1000¡ãC: 2% ¡À 2¡ãC932¡ãF to 1832¡ãF: 2% ¡À 3.6¡ãF*Use with interchangeable 80PK Series temperature probes (one 80PK-1 Bead Probe included).   FLUKE C12A Fluke C12A Soft Case Contact Sales n/a   FLUKE C510 Fluke C510 Leather Case Contact Sales n/a   FLUKE FVF Fluke FVF FlukeView Forms Software Contact Sales Now you can get the professional looking documents you need and data analysis that is much more in-depth than from a meter alone. FlukeView Forms records, charts and graphs data to help you perform in-depth analysis. And it's so easy to use. FlukeView Forms comes with both standard and customizable forms. You can use them immediately or customize the format to fit your specific applications. Once your form is customized, it can be easily used by less experienced staff. If you prefer another brand of measurement analysis software, FlukeView Forms can easily port your data to the program of your choice. With the Fluke 180 Series (except the Fluke 187), 89 Series-IV, and 53/54 Series-II meters, you don't have to have the meter and computer running together to take your measurements. These meters can measure and store hundreds of readings to the meter's internal memory, and then later download the information to FlukeView Forms when you connect to your computer. FlukeView Forms also logs events to make analyzing your data easier. This unique method of data recording provides more detailed readings when the input signal changes significantly. The amount of signal change that will trigger an event can be adjusted to fit your specific test situation. The minimum, maximum and average of readings are recorded for each event. Logging sessions can also be configured so that data will be recorded over specific intervals (e.g., every 5 minutes or 30 seconds). The Fluke 189 and 89-IV log both events and interval data internally. For these DMMs, FlukeView Forms is the only way to extract and view the detailed min/max and event data from the meter¡¯s memory. And FlukeView Forms is the only way to change the 189¡¯s event threshold from the default of 4%. This makes FlukeView Forms an essential tool for any Fluke 189 owner! FlukeView Forms communicates with supported meters via an infrared (Ir) serial interface, that makes data transfer fast and easy. FlukeView Forms is meter aware so there aren't any configuration problems. Using the supplied IR serial cable, the software will automatically recognize your meter and transfer the data.   FLUKE i1010 Fluke i1010 AC/DC Current Clamp Contact Sales n/a   FLUKE i200 Fluke i200 AC Current Clamp Contact Sales n/a   FLUKE i200s Fluke i200s AC Current Clamp Contact Sales n/a   FLUKE i410 Fluke i410 AC/DC Current Clamp Contact Sales n/a   FLUKE TL223 Fluke TL223 Electrical Test Lead Set Contact Sales Fluke SureGrip accessories were designed to provide a reliable grip in slippery hands. Rubber-overmolded surfaces and finger-hugging curves give you a comfortable, steady hold on the accessory you can focus on making an accurate measurement. Every piece has the 1000 V Category III / 600 V Category IV safety ratings, making them safe for use in most industrial environments.   FLUKE TL23F Fluke TL23F Deluxe Electrical Test Lead Set Contact Sales n/a   FLUKE TL81A Fluke TL81A Deluxe Electronic Test Lead Set Contact Sales For use in low energy, electronic test applicationsRecommended for use in low energy, electronic test applications that require fine probing that is not easily achievable with larger industrial probes.   FLUKE TPAK Fluke TPAK ToolPak Contact Sales Now you can hang your meter almost anywhere with the new Fluke ToolPak accessories kit. ToolPak includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) hook-and-loop hanger straps.The universal hanger is designed to fit into the special module on the back of the meter. The universal hanger allows you to hang your meter on a nail, hook or other object. You can add a piece of rope, flexible wire or cable to hang the meter in almost any position.The 9-inch (43 cm) and 17-inch (23 cm) hook-and-loop straps are used with the universal hanger to wrap around and connect to a pipe, beam or any other convenient support structure.And finally, the special magnet accessory is designed to connect to either of the straps. The strong magnet accessory will attach to an electrical panel, a metal doorjamb or any other ferrous-type metal.With the universal hanger, two hook-and-loop straps and the magnet, ToolPak solves almost any hanging and positioning problem you may face with your meter.   Tektronix P6417 General Purpose Probe Contact Sales n/a   HP / Agilent 10074C HP / Agilent 10074C Passive Probe Contact Sales The Agilent 10074C 150 MHz passive probe is a great choice if you are looking for high quality at a very reasonable price. This general purpose probe is designed specifically to give you optimal performance with your 54620-Series oscilloscopes. Ruggedized for general purpose measurements, the 10074C features a durable cable and a solid stainless steel probe body encased with a hard, fracture-resistant plastic. General purpose retractable hook tip - hooks onto wires and test points for hands-free probing. Ground bayonet - provides short, flexible ground lead for high-frequency measurements General purpose alligator clip ground lead - allows for versatile grounding.   HP / Agilent 1146A HP / Agilent 1146A Current Probe Contact Sales This AC/DC current probe provides accurate display and measurement of currents from 100 mA to 100 A rms, dc to 100 kHz, without breaking the circuit. The Agilent 1146A uses Hall-effect technology to measure ac and dc signals. It is compatible with all Agilent oscilloscopes and any scope with 0.2 to 0.5 V/div sensitivity, a minimum input impedance of 1 MΩ and a BNC input.   HP / Agilent 34161A HP / Agilent 34161A Accessory Pouch Contact Sales The Agilent 34161A Cordura? pouch fits on top of the Agilent 34401A and 34420A DMMs, the Agilent 34970A Data Acquisition/Switch Unit, the Agilent 33120A and 33250A sources, the Agilent 53131A, 53132A and 53181A counters, most E3600 power supplies and other 2-slot, half rack sized Agilent products. Its dual zippered compartments can hold manuals, power cords and other accessories.   HP / Agilent 34330A HP / Agilent 34330A 30 Amp Current Shunt Contact Sales The Agilent 34330A current shunt is a precision 0.001 ohm resistor housed in a plastic case surrounded by epoxy. Output is 1 mV per A of current passing through the shunt. The current to be measured is connected to the shunt via binding posts. The Agilent 34330A is compatible with the Agilent 34401A and 3458A DMMs.   HP / Agilent 82350A HP / Agilent 82350A, 82350B GPIB Interface, PCI Bus Contact Sales The 82350A is being replaced by the new and improved 82350B. Although the 82350A is still available, we recommend you order the 82350B instead.The Agilent 82350B is a low-cost, high-performance IEEE-488 interface and software for PCI-based PCs. The 82350B makes it easy to access and control instruments and exchange data. This is a high-speed PCI card with built-in buffering, which de-couples GPIB transfers from the PCI bus transfers. Buffering provides I/O and system performance that is superior to direct memory access (DMA) - up to 900 KB/s. (The older 82350A goes up to 750 KB/s.)The 82350B comes with SICL and VISA software for Windows? 98/Me/NT/2000/XP. This software is compatible with previous versions of SICL/VISA. The hardware is software configurable and compatible with the plug&play standard for easy hardware installation. The GPIB interface card plugs into a +5V PCI slot in the backplane of your PC. Via a GPIB cable, this card connects to GPIB instruments. For VXI applications a GPIB cable connects the card to the command module in Slot 0 of the VXI mainframe.   HP / Agilent 82350B HP / Agilent 82350A, 82350B GPIB Interface, PCI Bus Contact Sales The 82350A is being replaced by the new and improved 82350B. Although the 82350A is still available, we recommend you order the 82350B instead.The Agilent 82350B is a low-cost, high-performance IEEE-488 interface and software for PCI-based PCs. The 82350B makes it easy to access and control instruments and exchange data. This is a high-speed PCI card with built-in buffering, which de-couples GPIB transfers from the PCI bus transfers. Buffering provides I/O and system performance that is superior to direct memory access (DMA) - up to 900 KB/s. (The older 82350A goes up to 750 KB/s.)The 82350B comes with SICL and VISA software for Windows? 98/Me/NT/2000/XP. This software is compatible with previous versions of SICL/VISA. The hardware is software configurable and compatible with the plug&play standard for easy hardware installation. The GPIB interface card plugs into a +5V PCI slot in the backplane of your PC. Via a GPIB cable, this card connects to GPIB instruments. For VXI applications a GPIB cable connects the card to the command module in Slot 0 of the VXI mainframe.   HP / Agilent 82357A HP / Agilent 82357A USB / GPIB Interface Contact Sales The Agilent 82357A USB/GPIB Interface provides a direct connection from the USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. You don't need to learn a new programming protocol. Getting connected has never been easier. The 82357A comes with the SICL (Standard Instrument Control Libraries) and VISA (Virtual Instrument Software Architecture) software for Windows? 98 (SE)/Me/2000/XP. This software offers ease of use and compatibility among different instrument and software vendors. GPIB emulation assures that your existing GPIB programs work immediately, without modification.Since the 82357A is a standard Plug and Play device, it is automatically detected and configured when connected to the computer USB port. The USB/GPIB Interface software allows transparent communication between a PC and up to 14 GPIB instruments, offering transfer rates over 750 Kbytes/sec for large blocks of data.   HP / Agilent 83241C HP / Agilent 83241C GPIB Interface, ISA Bus Contact Sales The Agilent Technologies 82341C is a low cost, high performance IEEE-488 interface and software for ISA based PCs. With the 82341C it is easy to access and control instruments and exchange data. This is a high-speed, 16-bit card with built-in buffering, which decouples GPIB transfers from ISA bus transfers. Buffering provides I/O and system performance that is superior to direct memory access (DMA) - up to 750 KB/s.The 82341C includes SICL and VISA I/O software for Windows 95/98/NT/2000.   HP / Agilent E5810A HP / Agilent E5810A LAN/GPIB Gateway Contact Sales The Agilent E5810A LAN/GPIB gateway provides remote access and control of GPIB instruments via your 10BASE-T/100BASE-TX LAN. With the LAN/GPIB gateway, you can leverage your existing network to share test equipment and data easily. The gateway lets you situate your computer remotely, at a safer or more convenient location, and control your instruments over the LAN, instead of using a local computer with a GPIB interface card. The LAN/GPIB gateway comes with a built-in digital display and web server. Now, using your web browser, you can set up, configure and use the gateway from anywhere in the world. Multiple users can control the gateway from multiple locations, giving you the ability to collaborate with worldwide teams. With access to GPIB instruments, consult with colleagues in different locations, collect data, perform measurements, share instruments or just monitor the progress of your tests. The gateway - a combination of hardware and SICL/VISA software, uses client/server technology to extend the standard SICL/VISA functions to give you remote and distributed control of GPIB instruments. The gateway allows you to use SICL or VISA-based applications designed for GPIB over the LAN without modifying the applications beyond a simple address change.   HP / Agilent W1130A HP / Agilent W1130A T&M Programmers Toolkit Contact Sales Now you can cut your instrument programming time nearly in half. Speed up your product development process and improve your productivity with the Agilent T&M Programmers Toolkit instrument-control applications. The T&M Programmers Toolkit extends Microsoft's Visual Studio .NET platform with integrated, easy-to-use software tools and components -- project wizards, APIs, class libraries, widgets, drivers and more -- to make Visual Studio .NET the easiest place for you to write code for automating measurement tasks and displaying data. With the Toolkit, Agilent's extensive measurement expertise is integrated into the Visual Studio .NET framework, to eliminate the headaches traditionally associated with connecting to and controlling instruments. The software automatically generates code for you, and Windows functionality like drag and drop makes many tasks faster and easier. Robust debug, analysis and tuning tools further streamline the development process. Agilent's on-line test and measurement help, fully integrated at every step, lowers your programming learning curve.   HP / Agilent 11852B Minimum Loss Pad, 50 Ohm/75 Ohm, dc to 2 GHz Contact Sales n/a   HP / Agilent N2916B N2916B Rack Mount Kit for 5000 and 6000 Series Oscilloscopes $627.24 N2916B Rack Mount Kit for 5000 and 6000 Series Oscilloscopes   Electro Magnetics 6992-012-1291 Near Field Probe Set Contact Sales n/a   HP / Agilent 6992-012-1291 Near Field Probe Set Contact Sales n/a   HP / Agilent 3324-2 Power Divider, 20dB, 6GHz Contact Sales n/a   HP / Agilent Power Sensor $0.00 18 GHz Power Meter   HP / Agilent 8481A Power Sensor $0.00 Power Meter Sensor   HP / Agilent 8485A Power Sensor $0.00 Power Meter   HP / Agilent Q281B Q281B Coaxial Waveguide Adapter, 2.4 mm (m), 33 to 50 GHz $1,544.49 The Agilent Q281B is a 2.4 mm male to WR-22 waveguide adapter that operates in the 33 to 50 GHz frequency range. These adapters transform waveguide transmission lines into 50 ohm coaxial lines. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3. Features * Frequency Range: 33 - 50 GHz * Maximum SWR: 1.17 * Waveguide Designator: EIA WR-22 MIL-W-85/3-013 * Flange Designator: UG-383/U MIL-F-3922/67B-013 * Coaxial Connector: 2.4 mm male   HP / Agilent E1470-66202 Relay Replacement Part $1,751.73 Relay Replacement Part   HP / Agilent 00915-60003 Sliding Load $6,784.48 Sliding Load   Tektronix 1103 Tektronix 1103 TekProbe Power Supply Contact Sales The 1103 has dual TekProbe power supply inputs, dual BNC signal outputs and dual voltage offset on/off switches and potentiometers.*The characteristics for TekProbe Interface probes are subject to change when used with the 1103 Tek Probe Power Supply. Bandwidth, Risetime, Propagation Delays will generally differ from the advertised specification of the Probe Only.   Tektronix AM503S Tektronix AM503S AC/DC Current Probe System Contact Sales Includes the AM503B Current Probe AmplifierA microporocessor-controlled system with a bright, easy-to-read Current/Div display and DC balance at the push of a button. And you don't have to calibrate it with individual probes. The AM 503S Current Probe System is the most versatile current measurement system available. Since the probes incorporate both a transformer and a Hall Effect device, broadband AC/DC current can be measured simultaneously. Depending on the probe used, current from DC to 100 MHz and up to 700 A can be measured by clipping the split-core probes around the conductor. The AM 503S is truly a system, consisting of an AM503B Current Probe Amplifier, a TM 502A two-wide Power Module, and an A6302 Current Probe, BNC-BNC cable, 50 Ohms termination, and a plug-in tool box. Options enable you to add or substitute an A6312 Current Probe, A6303 Current Probe or delete the A6302 Current Probe. The AM503B Current Probe AmplifierThe AM503B Current Probe Amplifier is the heart of the AM503S System. The AM503B amplifies and sums the voltage outputs from the transformer and Hall Effect device and outputs it to the measurement instrument. It also provides the Hall Effect Device bias voltage and a reverse bucking current which resists saturation of the A6312/A6302/A6303 Current Probe core. The AM503B Current Probe Amplifier is an improvement over the older AM503 and AM503A. All functions are microprocessor controlled, providing a significant improvement in ease of use and functionality. The AM503B uses bright, easy-to-read LEDs to display Current/Division settings which are controlled with up/down push buttons. A single push button provides both Degauss and Auto-Balance functions. An additional significant improvement with the AM503B is that individual 6312/A6302/A6303 probes no longer need to be calibrated with a specific amplifier but can be interchanged between AM503Bs. The AM503B supports the new XL Series of current probes. The AM503B operates in any TM 500/TM 5000 power module. The 50 Ohm output of the AM503B can be displayed on any oscilloscope or measurement instrument that has a sensitivity setting of 10 mV/Div. The scope or measurement instrument requires at least a 400 MHz bandwidth to display the full bandwidth of the A6312 (100 MHz) and 50 MHz for the A6303. You can select either AC only mode or a DC mode which allows you to display a combined AC/DC current signal.   Tektronix iView Tektronix iView Integrated View Interface Contact Sales FREE Integrated ViewAn $1,805 value, FREE with purchase, iView (Integrated View) capability seamlessly integrates data from TLA600 Series logic analyzers and TDS oscilloscopes. This allows you to transfer analog waveforms from the oscilloscope to the logic analyzer display and automatically time-correlate them - a great tool for tracking down those elusive glitches. Tektronix is offering the iView External Oscilloscope Interface for FREE when a TLA600 Series logic analyzer and a new TDS1000/2000/3000B/5000 oscilloscope are purchased together. Offer expires 12/31/2003.Strides in Silicon Performance Impact System DesignsDramatic advances in the performance of devices such as processors and memories have created the need for much higher performance digital buses. In response, system designers have turned to faster edges, lower voltages, multi-pumping of data, and source synchronous techniques among others. Consequently, many new digital system designs are plagued with problems that arise from fast, complex signals: glitches, noise, anomalies, and more. These aberrations are analog in nature, even though the system itself may be digital. A high-performance oscilloscope is the best tool for acquiring such signal aberrations, while the logic analyzer remains the core tool for digital acquisition, display, and analysis. Analog, Digital Signals Share the Same DisplayThe new Integrated View (iView) package includes TLA Application Software and interconnect cable to integrate its TLA600 or TLA700 Series logic analyzers with Tektronix oscilloscopes. iView couples selected Tektronix TDS family oscilloscopes with TLA series logic analyzers, producing a solution that shows, on the same logic analyzer display, time-correlated views of both digital and analog waveforms. Set up is easy through the use of an external oscilloscope wizard in the TLA Series logic analyzer user interface which guides the user through set up and connection. No user calibration is required. And, once set up is completed, iView is completely automated. iView provides the flexibility to use the logic analyzer and oscilloscope independently or together. Equally important, iView gives TLA Series logic analyzer users integrated access to the unmatched performance of the TDS oscilloscope's bandwidth. This is the first time this level of oscilloscope performance has been paired with a logic analyzer, particularly beneficial to designers solving signal integrity problems on the latest high-speed processors and buses. Using iView, engineers can capture fast analog waveform details and time-correlate them on the logic analyzer display with the equivalent digital events. The two types of waveforms can be superimposed, if desired. iView makes it easy to see how a faulty signal edge, for example, correlates with erroneous data revealed by the logic analyzer display. Many mainstream digital design applications are today served by the cost-effective TLA600 Series logic analyzers. iView brings seamless integration of oscilloscope and logic analyzer acquisition to the TLA600 for the first time.   Tektronix K4000 Tektronix K4000 Mobile Workstation Cart Contact Sales The K4000 Mobile Workstation provides convenient instrument transportation while adding valuable workspace for those crowded labs. This compact three-shelf cart is based on the sturdy K400 series architecture, able to support a varied combination of instruments, PC, printers and/or display monitors up to 21 in. Key enhancements feature an extended middle shelf for comfort and space when using a keyboard and mouse with Window-based instrumentation. Bonus items include a skyhook for probe cable management, monitor clips and instrument brackets for stability and a storage drawer.   Tektronix K420 Tektronix K420 Oscilloscope Cart Contact Sales These sturdy, portable carts are specifically designed for the Tektronix TDS Series Oscilloscopes. The tiltable top shelf is large enough to accommodate other rack-width instruments as well. Heavy-duty nylon straps hold the instrument securely. The cart handle can serve as a probe drape. In addition, the spacious accessory drawer provides convenient storage for power cords, probes, manuals, and small parts. Shipped ready to assemble. Includes: Probe holders, two heavy duty nylon instrument straps, instrument manual, retainer bar, hex wrench, level.   Tektronix P5100 Tektronix P5100 High Voltage Probe Contact Sales Obtaining a clear signal is a significant challenge for electronic designers working on digital systems because the complexity of these designs can degrade signal quality. The Tektronix iView package makes it possible to routinely view time-correlated waveforms from oscilloscopes with bandwidths up to 4-GHz on the logic analyzer display (depending on oscilloscope used), enabling engineers to quickly track down elusive signal integrity problems in their designs. The P5100 is a low-input capacitance High Voltage (2.5 kV) Probe designed for higher frequency applications. The probe can be compensated to match plug-ins and oscilloscopes with nominal input capacitances of 7-30 pF. A variety of screw-on accessories provide easy connection to the device under test. Includes: Two each three colors Cable Markers, One each Crocodile Clip, One each Adjustment Tool, One each Hooktip (Small), One each Hooktip (large), One each 18 inch Ground Lead, One each six inch Ground Lead, Instruction Manual (070-8151-00).   Tektronix P5200 Tektronix P5200 Active Differential Probe Contact Sales The P5200 can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200 Active Differential Probe converts floating signals to low voltage ground referenced signals that can be displayed safely and easily on any ground referenced oscilloscope.   Tektronix P5205 Tektronix P5205 Active Differential Probe Contact Sales The P5205 is a 100 MHz Active Differential Probe capable of measuring fast rise times of signals in floating circuits. This 1,300 V differential probe can measure safely voltages in IGBT circuits such as motor drives or power converters. It is specifically designed to operate on Tektronix oscilloscopes with TekProbe interface.   Tektronix P5210 Tektronix P5210 High Voltage Differential Probe Contact Sales The P5210 enables users to make floating measurements with the scope grounded, resulting in safer, more accurate measurements and higher productivity. The P5210 is ideal for power supply design, motor drive design, electric vehicle research, electronic ballasts design, and the field service industry. The probe is specifically designed for use with Tektronix TDS oscilloscopes. It can also be used with other oscilloscopes by utilizing the 1103 TekProbe Power Supply.   Tektronix P6015A Tektronix P6015A High Voltage Probe Contact Sales For heavy duty high-performance measurements of voltages over 2.5 kV, the P6015A is the industry standard. You can measure DC voltages up to 20 kV and pulses up to 40 kV. The 75 MHz bandwidth enables you to capture fast, high-voltage signals. The P6015A uses an environmentally safe silicone compound for a dielectric and never needs refilling. Other features include: a 7-49 pF compensation range, small compensation boxes which fit on adjacent amplifier inputs, and a readout option for use with Tektronix digital scopes. With the readout option, displayed voltage amplitude values will be the actual signal value rather than understated by a factor of 1,000. Using the readout version with other than Tektronix digital scopes may result in an erroneous readout display.   Tektronix P6243 Tektronix P6243 Active Voltage Probes Contact Sales High-speed measurements demand the correct probe for faithful measurements. The P6243 has ultra-low input capacitance and high input resistance to make accurate measurments-even on high impedance test points. Includes accessories and adapters for connection to SMDs. Plugs directly into scopes with the TekProbe interface. For all other scopes, order the 1103 TekProbe Power Supply.   Tektronix TCP202 Tektronix TCP202 DC Current Probe Contact Sales The TCP202 is a general-purpose probe for displaying and measuring current in electronic circuits. It's ideal for power supply and motor drive design, and for device testing. When combined with a Tektronix TDS oscilloscope, the TCP202 enables users to make direct readout DC and AC current measurements, resulting in accurate displayed and recorded measurements.The TCP202 enables DC and AC current measurements using a convenient clip-on probe, so circuit connections don't have to be broken. Measure Instantaneous PowerUse the TCP202 probe with a Tek P5205 high-voltage probe on your TDS300, 400, 500, 600, 3000, 5000 scope, and by using the MATH waveform multiply function, you can display instantaneous power as a trace on the scope! Bandwidth: DC to 50 MHzPeak Pulse: 50 AMax AC p-p: 30 ADerate Above: 50 kHzMax DC: 15 ARise Time: <= 7.0 nsInsertion Impedance @ 1 MHz: 0.07 OhmMax Barewire Voltage: 300 VMax Conductor Diameter: 3.8 mmCable Length: 2 m   Tektronix TCP303 Tektronix TCP303 AC/DC Current Probe Contact Sales Increased performance and simplicityThe TCP300 and TCP400 series AC/DC Current Measurement family is a highly advanced current measurement system for today's current measurement needs. The split-core probes incorporate both transformer and Hall effect technology to provide broad bandwidth measurement capabilities from DC up to 100 MHz at current levels as low as 1 milliamp to thousands of amps (when used with CT4 current transformer). When connected to Tektronix TDS Oscilloscopes with TEKPROBE Level II or TekConnect (w/TCA-BNC) interfaces, current measurements and calculations are simple and easy.Additional measurement power is available with add on software such as the TDSPWR2 power measurements package. With all this measurement power current measurements have never been easier.Meets today's AC/DC current measurement applicationsThe TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provide a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A, and 150A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC.Measurement errors and manual calculations are now a thing of the pastWith this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS400A, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000 Series oscilloscope systems. TDS series oscilloscopes provide on-screen scaling and units. Status LEDs quickly show you TCP300/400 Series operating status or potential error conditions that may have caused measurement errors in the past.The TCP300/TCP400 Current Measurement Systems seamlessly integrate with your TDS series oscilloscope and the TDSPWR2 software package to easily make those time consuming power measurements and calculations for you.Non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.All TCP300/TCP400 Current Probes Include:Instruction sheet, probe cover, certificate of traceable calibration.All TCPA300/TCPA400 Current Probe Amplifiers Include:Instruction/service manual, TEKPROBE interface cable, Male to Male BNC cable (50 Ohm), 50 Ohm feed-through termination, certificate of traceable calibration.   Tektronix TCP305 Tektronix TCP305 AC/DC Current Probe Contact Sales Increased performance and simplicityThe TCP300 and TCP400 series AC/DC Current Measurement family is a highly advanced current measurement system for today's current measurement needs. The split-core probes incorporate both transformer and Hall effect technology to provide broad bandwidth measurement capabilities from DC up to 100 MHz at current levels as low as 1 milliamp to thousands of amps (when used with CT4 current transformer). When connected to Tektronix TDS Oscilloscopes with TEKPROBE Level II or TekConnect (w/TCA-BNC) interfaces, current measurements and calculations are simple and easy.Additional measurement power is available with add on software such as the TDSPWR2 power measurements package. With all this measurement power current measurements have never been easier.Meets today's AC/DC current measurement applicationsThe TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provide a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A, and 150A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC.Measurement errors and manual calculations are now a thing of the pastWith this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS400A, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000 Series oscilloscope systems. TDS series oscilloscopes provide on-screen scaling and units. Status LEDs quickly show you TCP300/400 Series operating status or potential error conditions that may have caused measurement errors in the past.The TCP300/TCP400 Current Measurement Systems seamlessly integrate with your TDS series oscilloscope and the TDSPWR2 software package to easily make those time consuming power measurements and calculations for you.Non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.All TCP300/TCP400 Current Probes Include:Instruction sheet, probe cover, certificate of traceable calibration.All TCPA300/TCPA400 Current Probe Amplifiers Include:Instruction/service manual, TEKPROBE interface cable, Male to Male BNC cable (50 Ohm), 50 Ohm feed-through termination, certificate of traceable calibration.   Tektronix TCP312 Tektronix TCP312 AC/DC Current Probe Contact Sales Increased performance and simplicityThe TCP300 and TCP400 series AC/DC Current Measurement family is a highly advanced current measurement system for today's current measurement needs. The split-core probes incorporate both transformer and Hall effect technology to provide broad bandwidth measurement capabilities from DC up to 100 MHz at current levels as low as 1 milliamp to thousands of amps (when used with CT4 current transformer). When connected to Tektronix TDS Oscilloscopes with TEKPROBE Level II or TekConnect (w/TCA-BNC) interfaces, current measurements and calculations are simple and easy.Additional measurement power is available with add on software such as the TDSPWR2 power measurements package. With all this measurement power current measurements have never been easier.Meets today's AC/DC current measurement applicationsThe TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provide a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A, and 150A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30A DC.Measurement errors and manual calculations are now a thing of the pastWith this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS400A, TDS500, TDS600, TDS700, TDS5000, TDS6000 and TDS7000 Series oscilloscope systems. TDS series oscilloscopes provide on-screen scaling and units. Status LEDs quickly show you TCP300/400 Series operating status or potential error conditions that may have caused measurement errors in the past.The TCP300/TCP400 Current Measurement Systems seamlessly integrate with your TDS series oscilloscope and the TDSPWR2 software package to easily make those time consuming power measurements and calculations for you.Non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.All TCP300/TCP400 Current Probes Include:Instruction sheet, probe cover, certificate of traceable calibration.All TCPA300/TCPA400 Current Probe Amplifiers Include:Instruction/service manual, TEKPROBE interface cable, Male to Male BNC cable (50 Ohm), 50 Ohm feed-through termination, certificate of traceable calibration.